Kiribi Kenshi Pipe Lighter - Black

Fuel Refill:

• Ensure the lighter is nearly empty to prevent overfilling.
• Locate the fuel gage on the bottom of the lighter and turn it all the way down toward the minus symbol. 

• Locate the butane refill chamber next to the fuel gage.
  

• Using high quality butane, press the stem of the can directly into the lighter for short bursts. While pressing down, count to five and then release. Repeat this three to five times (or more depending on the fuel capacity of your lighter). Do not overfill. 

• Allow the lighter to rest upright for about one minute.
• Set the fuel gauge to halfway between the minus and plus symbols, then ignite.
• Adjust the fuel gage to your preferred flame height. 

Lighter Fluid:

We like high quality butane like Xikar or Newport Zero. Both will increase the lifespan of the lighter and make for a smoother lighting experience.

Flint Replacement:

• Locate the small slotted screw on the side of the lighter head.

• Unscrew and gently pull the spring-loaded rod out of the lighter.

• Remove any leftover expired flint.
• Insert a new Kiribi flint into the opening.
• Reinsert the spring-loaded rod and press firmly you are able to screw the rod back into the lighter.
  

Cleaning the Lighter:

To clean your Kiribi Kenshi, first ensure the lighter is empty and unlit.

Remove the flint and gently brush out any debris from the flint tube and striker wheel using a soft brush or compressed air.

Wipe the exterior with a soft, dry cloth to maintain the finish.

If needed, use a cotton swab lightly dampened with isopropyl alcohol to clean around the ignition area—avoiding the wick and fuel chamber.

Allow all parts to fully dry before reassembling and refueling.

Pro Tip:

If the wheel spins without sparks or the flame weakens, it’s typically time for fresh flint or more fuel.

Like many of the heirloom products we sell, your lighter will need occasional maintenance. In many ways, maintaining our lighters is as fulfilling as owning them. That being said, your lighter will require some basic knowledge of what and how things can go wrong and what to do about each issue if and when they occur.

If your lighter is having any sort of issues lighting, the culprit is generally one of the following issues.

Issue #1: Your lighter is not sparking.

Solution #1: Replace the flint. The process for doing so on these lighters is different from lighter to lighter, but usually there is an area you can unscrew that allows you to add flint to the lighter. Please ask if you need help finding it.

Issue #2: The lighter is sparking and producing a flame, but the flame instantly disappears or the flame is very small.

Solution #2: Your lighter likely needs more fuel. Refill it with butane until it feels noticeably heavier. As it nears full, you may see a slight sputter at the fill valve—this is a sign you’re close to overfilling.

If the lighter still isn’t performing properly, check the flame adjustment. The fuel gauge may be set too low. After refilling, gradually increase the gas output until the flame stabilizes.

Because most butane lighters don’t have a visible fuel window, learning when it’s properly filled takes a bit of experience. Over time, you’ll recognize the signs based on flame strength and consistency.

Issue #3: The lighter is sputtering.

Solution #4: You have either filled the lighter incorrectly, overfilled the lighter, or your gas is turned up too high. If turning the gas down does not solve the issue, try emptying the lighter completely (purging) and refilling it carefully according to the manufacturer's instructions. Be sure to use the best butane you a find. For recommendations on butane, check the product page of your lighter.

If you are struggling with maintaining your lighter in any way, please don't hesitate to reach out to support@lastmanner.com. We love to gab about the maintenance process.

The origins of Kiribi lay in the traditional Japanese practice of casting sparks upon a beloved traveler’s back, in order to impart fortune and ward off evil, blessing them on their journey. The practice hearkens back to the famous 8th century legend of Prince Yamatotakeru, and the aunt who gifted him the firestone and striker which saved his life along perilous travels. In time, the same simple tool kit that was used to perform the original Kiribi came to be used by the countryfolk of Japan to light their pipes; and thus the inspiration for the Kiribi line.

We ship using USPS and UPS, depending on the destination and the products ordered. All shipments include tracking and up to $200 of insurance.

Complimentary Shipping Thresholds:

• USPS Ground Advantage (U.S.): Complimentary on orders over $100.00.
• UPS International: Complimentary on orders over $350.00.
  • Please note: Duties, taxes, and import fees may apply and are the responsibility of the recipient.

Shipping Times:

• Most items ship within one business day (Monday to Friday, excluding holidays).
• Orders placed by 2 PM Pacific Time often ship the same day.
  

Additional Notes: 

• Fine art pieces valued over $500 ship separately via complimentary UPS Expedited insured service with adult signature required. Split shipments will be dispatched simultaneously. 
  
• While we offer insurance on your shipments, once a package is marked “delivered,” insurance no longer covers theft or loss. Please deliver to secure locations or ensuring someone is available to receive your package. 
• Shipping costs are non-refundable. 

International Orders:

• For international orders, customs duties, taxes, and fees may apply. These are determined by your country and are the responsibility of the recipient. Items rejected or seized by customs due to import restrictions are not the responsibility of Last Manner.
• We do not ship knives internationally.
• We ship UPS only.

For our full shipping policy, please see shipping policies.

Returns are accepted within 30 days of receipt of your order, provided the merchandise is in its new, unused condition and includes the original packaging. Items that show signs of use, arrive without the original packaging, or received after the 30-day period will not be accepted.

Exceptions:

• Lighters: We cannot accept returns for lighters that have been filled with fluid.
  
• Brass/Copper/Bronze Products: Items that have had their vacuum seal opened or have been handled and exposed to oxidation are considered used and are not eligible for return.
  
• Art, Vintage & Gift Cards: Photographs, posters, gift cards, vintage artwork, vintage items, and "Bygone Goods" products are final sale. 

Refunds to the original payment method will incur a flat $5 restocking fee, which will be deducted from your refund. Returns for store credit or exchanges are not subject to this fee.

For our full return policy, please see return policies.